Slider-BG3

Butterfly valve, sandwich design Type BKRI 1.0 – 1.5

Model

1.0 ISO-flange
1.1 Hand lever, engaged
1.2 Gearbox
1.3 Actuator
1.4 Actuator MVEN, with solenoid valve, limit switch box
1.5 Electric drive

Flange connection according to PN 10/16
Length according to BK factory standard and DIN 3202 K1
Operation flange ISO 5211/Namur
Tightly closing according to DIN EN 12266-1, sealing elements replaceable
Driving mode: manual, pneumatic, hydraulic or electric drive possible

Range of application
Shut-off and control of gaseous and liquid media as well as bulk solids of all kinds, e.g. powders, granules, fibres etc. for plant engineering, construction of vehicles, chemical-, pharmaceutical- and food industry, ventilation systems and water supply.

Product specification
A special feature of these butterfly valves is a shaft with low torque which is centrally positioned on bearings. The short construction enables minimum space requirements and low weight.

PartsFactory StandardOptions
BodyAluminiumSt. 1.0570, GG, Stainless steel
FlapSteelStainless steel, Alu,Hastelloy
ShaftSteelStainless steel, Alu,Hastelloy
SealingNBREPDM, Vulkollan, Hypalon, Viton, Silikone, BUNA, ELL und PTFE

Monoflange butterfly valve Type BKMF 2.0 – 2.5

Model

2.0 ISO-flange
2.1 Hand lever, engaged
2.2 Gearbox
2.3 Actuator
2.4 Actuator with solenoid valve, limit switch box
2.5 Electric drive

Flange connection according to PN 10/16 bore hole or thread, other flange connections upon request
Length according to BK factory standard and DIN 3202 K1
Operation flange ISO 5211/Namur
Tightly closing according to DIN EN 12266-1, sealing elements replaceable
Driving mode: manual, pneumatic, hydraulic or electric drive possible

Range of application
Shut-off and control of gaseous and liquid media as well as bulk solids of all kinds, e.g. powders, granules, fibres etc. for plant engineering, construction of vehicles, chemical-, pharmaceutical- and food industry, ventilation systems and water supply.

Product specification
A special feature of these butterfly valves is a shaft with low torque which is centrally positioned on bearings. The short construction enables minimum space requirements and low weight.

PartsOptions
BodySt. 1.0570, GG,Stainless Steel
FlapStainless Steel, Alu,Hastelloy
ShaftStainless Steel, Alu,Hastelloy
SealingEPDM,Vulkollan,Hypalon, Viton, Silikone, BUNA, ELL und PTFE

Butterfly valve with seal Type BKLL 3.0 – 3.5

Model

3.0 ISO-flange
3.1 Hand lever, engaged
3.2 Gearbox
3.3 Actuator
3.4 Actuator MVEN, with solenoid valve, limit switch box
3.5 Electric drive

Tension ring groove (e.g. system Jacob) or flange connection
according to DIN 24154, EN 12220
Length according to BK factory standard
Operation flange ISO 5211/ Namur
Driving mode: manual, hydraulic, pneumatic or electrical drive possible

Range of application
Shut-off and control of gaseous and liquid media as well as bulk solids of all kinds, e.g. powders, granules, fibres etc. for plant engineering, chemical-, pharmaceutical- and food industry and ventilation systems

Product specification
A special feature of these butterfly valves is a shaft with low torque which is centrally positioned on bearings. The short construction enables minimum space requirements and low weight.

PartsFactory StandardOptions
BodyAluminiumSt. 1.0570, GG, Stainless Steel
FlapSteelStainless Steel, Alu,Hastelloy
ShaftSteelStainless Steel, Alu,Hastelloy
SealingNBREPDM,Vulkollan,Hypalon, Viton, Silikone, BUNA, ELL und PTFE

Container valve Type BKCO 4.1

Model

4.1 Driving mode: manual

For flange-mounting under containers Length according to BK factory standard Tightly dosing according to DIN 3230 sealing elements replaceable

Range of application
Shut-off and control of gaseous and liquid media as well as bulk solids of all kinds, e.g. powders, granules, fibres etc. for plant engineering, construction of vehicles, chemical-, pharma- ceutical- and food industry

Product specification
A special feature of these butterfly valves is a shaft with low torque which is centrally positioned on bearings. The short construction enables minimum space requirements and low weight.

PartsFactory StandardOptions
BodyAluminiumSt. 1.0570, GG,Stainless Steel
FlapSteelStainless Steel, Alu,Hastelloy
ShaftSteelStainless Steel, Alu,Hastelloy
SealingNBREPDM, Vulkollan, Hypalon, Viton, Silicone, BUNA, ELL und PTFE